16fl. oz (473ml)
Detailing Kit
Complete your paint care routine with four essential products: all-purpose cleaner, pH-balanced car shampoo, iron remover, and ceramic spray. This curated system removes contaminants, safely cleanses your finish, eliminates embedded iron particles, and applies a protective ceramic layer. Designed to work together, each formula preserves your PPF and paint while delivering professional results at home.
Warnings
- May irritate skin.
- Harmful if swallowed.
- Keep away from children.
- Avoid eye contact. If exposed, flush with water for 15 minutes and seek medical attention immediately
For Emergency or Ingredient Information: INFOTRAC 800.535.5053
Kit Includes
Removes grease, grime & dirt
Our All-Purpose Cleaner is a ready-to-use, high-pH formula that is non-corrosive, non-acidic, and non-caustic. It is suitable for exterior surfaces including wheel wells and engine bays, as well as interior surfaces such as door panels and dashboards.
Bucket was or foam cannon
Our pH-neutral, high foaming car soap is an essential addition to any detailing lineup and represents our premium offering in this category. It effectively removes grease, bugs, oil, and road film from paint, glass, and chrome surfaces. The formula cleans thoroughly while enhancing paint shine and is compatible with both foam cannons and bucket washes.
Removes iron particles, industrial fallout & embedded contaminants
Our Iron Remover is a specialized formula designed to eliminate iron particles from vehicle surfaces. These contaminants, sourced from brake dust and industrial fallout, can embed in paint and cause damage if not addressed. Unlike acidic alternatives, this pH-balanced, acid-free solution is safer for both your vehicle and personal use.
Deep Enhanced Shine
Our Ceramic Spray utilizes advanced SiO2 technology to deliver superior hydrophobic properties and a deeper shine than traditional spray waxes. For enhanced protection and gloss, choose this cutting-edge solution in vehicle care.
Directions
Ceramic Spray
After washing your vehicle with car soap, ensure it is completely dry. Apply the Ceramic Spray to a clean microfiber towel and spread it evenly over the vehicle's panels. Buff off any residue with a separate clean microfiber towel.
All Purpose Cleaner
Spray the product directly on the surface to be cleaned and agitate with a towel. For heavy duty jobs, use carpet brush to agitate the surface. Immediately wipe the surface with a clean towel or cloth and let it dry.
Car Shampoo
- Pour 1 to 2 ounces (1 to 2 cap full) of soap into an empty 5 Gallon clean wash pail. Top it with pressurized water to create a rich foam and apply only to a cool surface.
- To use with a foam cannon. add 2-3 ounces to the foam cannon and fill with water. For extra thick foam add an additional 2-3 ounces of soap.
- Start washing your vehicle from the top going down. Use wash mitt, mop or soft brush to apply soap to the car surface with agitation to break up stubborn grime.
- Immediately rinse with water to remove loose dirt, grime and filth. Wipe it dry with clean dry microfiber towel.
Iron Remover
Start by washing the vehicle to remove loose dirt, ensuring it's cool and out of direct sunlight. Spray iron remover generously on panels and wheels, focusing on tight areas like the wheels, calipers, and brakes. Wait for the product to turn purple, then gently agitate stubborn spots if needed. Rinse thoroughly.
*Use gloves during use.
*Do NOT let it dry on the surface of your vehicle
After washing your vehicle with car soap, ensure it is completely dry. Apply the Ceramic Spray to a clean microfiber towel and spread it evenly over the vehicle's panels. Buff off any residue with a separate clean microfiber towel.
Spray the product directly on the surface to be cleaned and agitate with a towel. For heavy duty jobs, use carpet brush to agitate the surface. Immediately wipe the surface with a clean towel or cloth and let it dry.
- Pour 1 to 2 ounces (1 to 2 cap full) of soap into an empty 5 Gallon clean wash pail. Top it with pressurized water to create a rich foam and apply only to a cool surface.
- To use with a foam cannon. add 2-3 ounces to the foam cannon and fill with water. For extra thick foam add an additional 2-3 ounces of soap.
- Start washing your vehicle from the top going down. Use wash mitt, mop or soft brush to apply soap to the car surface with agitation to break up stubborn grime.
- Immediately rinse with water to remove loose dirt, grime and filth. Wipe it dry with clean dry microfiber towel.
Start by washing the vehicle to remove loose dirt, ensuring it's cool and out of direct sunlight. Spray iron remover generously on panels and wheels, focusing on tight areas like the wheels, calipers, and brakes. Wait for the product to turn purple, then gently agitate stubborn spots if needed. Rinse thoroughly.
*Use gloves during use.
*Do NOT let it dry on the surface of your vehicle
Product In Use
How To Do Tesla Detailing Like a Pro
Want your Tesla to look showroom fresh every day? The Drive Protected Car Care Pack gives you everything you need for professional quality detailing at home. This complete guide walks you through t...