Directions

Iron Remover

Start by washing the vehicle to remove loose dirt, ensuring it's cool and out of direct sunlight. Spray iron remover generously on panels and wheels, focusing on tight areas like the wheels, calipers, and brakes. Wait for the product to turn purple, then gently agitate stubborn spots if needed. Rinse thoroughly.

*Use gloves during use.
*Do NOT let it dry on the surface of your vehicle

Car Shampoo
  • Pour 1 to 2 ounces (1 to 2 cap full) of soap into an empty 5 Gallon clean wash pail. Top it with pressurized water to create a rich foam and apply only to a cool surface.
  • To use with a foam cannon. add 2-3 ounces to the foam cannon and fill with water. For extra thick foam add an additional 2-3 ounces of soap.
  • Start washing your vehicle from the top going down. Use wash mitt, mop or soft brush to apply soap to the car surface with agitation to break up stubborn grime.
  • Immediately rinse with water to remove loose dirt, grime and filth. Wipe it dry with clean dry microfiber towel.
All Purpose Cleaner

Spray the product directly on the surface to be cleaned and agitate with a towel. For heavy duty jobs, use carpet brush to agitate the surface. Immediately wipe the surface with a clean towel or cloth and let it dry.

Ceramic Spray

After washing your vehicle with car soap, ensure it is completely dry. Apply the Ceramic Spray to a clean microfiber towel and spread it evenly over the vehicle's panels. Buff off any residue with a separate clean microfiber towel.